March 29, 2020

CDP-C700 CD Player Compact Disc Player 2001 Sony Corporation 11 Operating

CDP-C700 CD Player Compact Disc Player 2001 Sony Corporation 11 Operating - page 11

11

Playing CDs

Programming the CD

tracks

You can arrange the order of the tracks on the

discs and create your own program. The

program can contain up to 32 “steps” — one

“step” may contain a track or a whole disc.

1

Press PLAY MODE repeatedly until

“PROGRAM” appears in the display

before you start playing.

If a program is already stored, the last step

of the program appears in the display. When

you want to erase the whole program, hold

down CLEAR until “ALL CLr” appears in

the display (see page 12).

2

Press DISC 1 – 5 to select the disc.

“AL” in the display stands for “all” tracks.

When you want to program the whole disc

as one step, skip Step 3, and go to Step 4.

3

Turn 

l

AMS

L

 until the track you

want appears and push 

l

AMS

to

select the track.

The track number that you programmed, the

playing order, and the total playing time

appear in the display.

If you’ve made a mistake

Press CLEAR, then repeat Step 2.

Tip

You can select the track using the number buttons

on the remote. To select a track with a number

over 10, use >10 (see page 9).

4

To program other discs or tracks, do

the following:

5

Press 

H

 to start Program Play.

To cancel Program Play

Press PLAY MODE.

Tips

• You can create your program while checking the

disc labels.

While the disc tray is open, follow Steps 1 to 4 with

pressing the DISC SKIP button to check the disc

labels. If you close the disc tray before Step 5, the

total playing time appears in the display after a

while.

Note that, if the programmed track number isn’t

found on the disc, that step is automatically erased.

• The program remains even after the Program Play

ends. When you press the 

H

 button, you can play

the same program again.

• The program remains until you erase it or turn off

the player. If you replace discs, the programmed

disc and track numbers remain. So, the player plays

only the existing disc and track numbers. However,

the disc and track numbers that aren’t found in the

player or on the disc are deleted from the program,

and the rest of the program is played in the

programmed order.

• For the recording to the A side or B side of the

cassette tape, you can pause Program Play.

Note

The total playing time doesn’t appear when:

— You have programmed a track whose number

exceeds 20.

— The total playing time of the program exceeds 200

minutes.

Checking the track order

You can check your program before or after

you start playing.

Press CHECK.

Each time you press this button, the display

shows the track (the disc and track numbers) or

the disc (the disc number and “AL” indication)

of each step in the programmed order. After the

last step in the program, the display shows

“End” and returns to the original display. If you

check the order after you start playing, the

display shows only the remaining steps.

To program

Other discs

Other tracks on the

same disc

Other tracks on

other discs

Repeat Step(s)

2

3

2 and 3

continued




11 Playing CDs Programming the CD tracks You can arrange the order of the tracks on the discs and create your own program. The program can contain up to 32 “steps” — one “step” may contain a track or a whole disc. 1 Press PLAY MODE repeatedly until “PROGRAM” appears in the display before you start playing. If a program is already stored, the last step of the program appears in the display. When you want to erase the whole program, hold down CLEAR until “ALL CLr” appears in the display (see page 12). 2 Press DISC 1 – 5 to select the disc. “AL” in the display stands for “all” tracks. When you want to program the whole disc as one step, skip Step 3, and go to Step 4. 3 Turn  l AMS L  until the track you want appears and push  l AMS L  to select the track.

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

About The Author

Related posts